Phoenix Contact · Software
1060632 is a Phoenix Contact industrial component with Supply voltage 24 V DC ±15 %; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC ±15 %
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC ±15 % |
| I/O and communication |
| Bus interface |
without bus system |
| Resolution |
800 x 480 Pixel(s) (WVGA) |
| Mechanical |
| Weight |
668.5 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Touch type |
analog resistive |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Software specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Software variants |
| Catalog number |
Mounting |
|
1060632 (this page) |
DIN rail / panel |
| 1045512 |
DIN rail / panel |
| 1050004 |
DIN rail / panel |
| 5146053 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1060632 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC ±15 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1060632
Phoenix Contact 1060632 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1060632; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Supply voltage: 24 V DC ±15 % — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Humidity: 10 % ... 95 % (non-condensing) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1060632
Q.Where can I find the weight data for 1060632?
It is listed in the specification table for Phoenix Contact 1060632 as 668.5 g. Confirm this figure against the unit currently in the panel.
Q.For 1060632, what does the specification table state about humidity?
The specification table lists humidity = 10 % ... 95 % (non-condensing) for Phoenix Contact 1060632. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under certifications for catalog number 1060632?
For 1060632, certifications is given as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1060632?
Send the full catalog number 1060632, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1060632.
Q.Can the 1060632 replace the unit currently installed in my panel?
Compare catalog number 1060632 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.