Phoenix Contact · Software
1050004 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
1.37 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
50 % |
Values follow the Phoenix Contact Software specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Software variants |
| Catalog number |
Mounting |
|
1050004 (this page) |
DIN rail / panel |
| 1045512 |
DIN rail / panel |
| 1060632 |
DIN rail / panel |
| 5146053 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1050004 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1050004
Phoenix Contact 1050004 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1050004; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Humidity: 50 % — Record it with the other nameplate data when sourcing a replacement.
- Weight: 1.37 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1050004
Q.Before ordering 1050004, which humidity entry should be checked?
The humidity entry quoted above is 50 %. Confirm this figure against the unit currently in the panel.
Q.Where can I find the operating temperature data for 1050004?
It is listed in the specification table for Phoenix Contact 1050004 as 0...+55 °C (IEC 60068-2-1). Use the value as the reference when sourcing a current-production equivalent.
Q.For 1050004, what does the specification table state about weight?
The specification table lists weight = 1.37 g for Phoenix Contact 1050004. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1050004 before ordering?
Match the catalog number 1050004 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1050004 replace the unit currently installed in my panel?
Compare catalog number 1050004 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.