Phoenix Contact · Fiber Optic Distributor
1019679 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
575.6 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
12 |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Fiber Optic Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Fiber Optic Distributor variants |
| Catalog number |
Mounting |
|
1019679 (this page) |
DIN rail / panel |
| 1208051 |
DIN rail / panel |
| 1208052 |
DIN rail / panel |
| 1208054 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1019679 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1019679
Phoenix Contact 1019679 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1019679; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Weight: 575.6 g — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1019679
Q.Before ordering 1019679, which weight entry should be checked?
The weight entry quoted above is 575.6 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the terminal wire size data for 1019679?
It is listed in the specification table for Phoenix Contact 1019679 as 12. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1019679, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1019679. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1019679?
Send the full catalog number 1019679, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1019679.
Q.How do I confirm compatibility of 1019679 before ordering?
Match the catalog number 1019679 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.