Delta · Delta switching power supply
PMC-24V600W1BA is a Delta Power Supply. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Efficiency≥90%
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Efficiency |
≥90% |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists PMC-24V600W1BA under the Delta product line; the product type published for this catalog number is "Power Supply". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=PMC-24V600W1BA. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The PMC-24V600W1BA is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta PMC-24V600W1BA
Delta PMC-24V600W1BA — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number PMC-24V600W1BA; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about PMC-24V600W1BA
Q.Which official Delta document defines PMC-24V600W1BA?
The official Delta download-centre catalogue search for this model lists PMC-24V600W1BA under the Delta product line, and the product type published for this catalog number is "Power Supply". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=PMC-24V600W1BA. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under certifications for catalog number PMC-24V600W1BA?
For PMC-24V600W1BA, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Before ordering PMC-24V600W1BA, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the mounting data for PMC-24V600W1BA?
It is listed in the specification table for Delta PMC-24V600W1BA as 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for PMC-24V600W1BA?
Send the full catalog number PMC-24V600W1BA, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta PMC-24V600W1BA.
Q.Can the PMC-24V600W1BA replace the unit currently installed in my panel?
Compare catalog number PMC-24V600W1BA and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.