Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Delta · Delta switching power supply
PMC-24V150W1AA is a Delta variable-frequency drive with Rated operational voltage 1-phase 200-240 V / 3-phase 380-480 V; Overload capacity 150% for 60 s; Enclosure rating IP20 (IEC 60529). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated operational voltage | 1-phase 200-240 V / 3-phase 380-480 V |
|---|---|
| Input voltage range | 85...264 V AC / 110...300 V DC (IEC 61010) |
| Output current | 6.25 A (150 W max.) |
| Efficiency | up to 94 % |
| Frequency | 50/60 Hz |
| Overload capacity | 150% for 60 s |
| Mechanical | |
| Dimensions (H x W x D) | 178 x 97 x 38 mm (7.01 x 3.82 x 1.50 inch) |
| Weight | 0.48 kg (1.06 lb) |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal type | M3.5 x 7 Pins (Rated 300 V/15 A) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+40 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Delta Delta switching power supply specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Delta Delta switching power supply variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| PMC-24V150W1AA (this page) | 35 mm DIN rail (IEC 60715) | ||
| PMC-24V600W1BA | 35 mm DIN rail (IEC 60715) | ||
| PMS-48V750W1BTD | 35 mm DIN rail (IEC 60715) | ||
| PMT-24V100W2BA | 35 mm DIN rail (IEC 60715) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The PMC-24V150W1AA is the device-level element in a Delta variable-frequency drive installation. It receives the field signals and control supply listed above — 1-phase 200-240 V / 3-phase 380-480 V — and switches or conditions the load within the 1-phase 200-240 V / 3-phase 380-480 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Delta PMC-24V150W1AA — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number PMC-24V150W1AA; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Available from stock with datasheet, certificates and a quotation on request.
Q.For PMC-24V150W1AA, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Delta PMC-24V150W1AA. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under efficiency for catalog number PMC-24V150W1AA?
For PMC-24V150W1AA, efficiency is given as up to 94 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering PMC-24V150W1AA, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+40 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of PMC-24V150W1AA before ordering?
Match the catalog number PMC-24V150W1AA and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for PMC-24V150W1AA?
Send the full catalog number PMC-24V150W1AA, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta PMC-24V150W1AA.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
