Delta DRL-24V480W1AS Power Supply

Delta · Delta PLC

DRL-24V480W1AS is a Delta Power Supply. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.

• Efficiency≥90%
• Enclosure ratingIP20 (IEC 60529)
• Mounting35 mm DIN rail (IEC 60715)

Specifications

Product type and series follow the official Delta download-centre catalogue search for this model which lists DRL-24V480W1AS under the Delta product line; the product type published for this catalog number is "Power Supply". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DRL-24V480W1AS. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.

Where it sits in the control system

The DRL-24V480W1AS is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range stated in the manufacturer documentation, not to a generic assumption.

Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Delta DRL-24V480W1AS

Delta DRL-24V480W1AS — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DRL-24V480W1AS; always cross-check the catalog number and hardware revision on the nameplate before placing an order.

• Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
• Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
• Efficiency: ≥90% — Verify it in the project documentation before confirming the order.
• Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about DRL-24V480W1AS