Delta · Accessories for C2000 Series
CMC-EIP01 is a Delta EtherNet/IP Communication Card. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue entry for this order number which classifies CMC-EIP01 as "EtherNet/IP Communication Card Instruction Sheet". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMC-EIP01. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CMC-EIP01 is the fieldbus element in a Delta control installation. It carries the bus signals between the controller and the field devices, so the bus topology, cable lengths and termination are sized to the interface parameters stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta CMC-EIP01
Delta CMC-EIP01 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number CMC-EIP01; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about CMC-EIP01
Q.Which official Delta document defines CMC-EIP01?
The official Delta download-centre catalogue entry for this order number classifies CMC-EIP01 as "EtherNet/IP Communication Card Instruction Sheet". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMC-EIP01. Use that document as the authority for ratings and installation conditions before ordering.
Q.Which value is published under certifications for catalog number CMC-EIP01?
For CMC-EIP01, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for CMC-EIP01?
Send the full catalog number CMC-EIP01, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta CMC-EIP01.
Q.Can the CMC-EIP01 replace the unit currently installed in my panel?
Compare catalog number CMC-EIP01 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.