Delta · DPM-C520
DPM-C520 is a Delta Muiti-Functional Power Meter. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage100...240 V AC / 24 V DC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
100...240 V AC / 24 V DC |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow official Delta document DPM-093AH20-02 (Operation Manual, issued 2020-07-31) which classifies DPM-C520 as "Multi-Functional power meter". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DPM-C520. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta DPM-C520 variants |
| Catalog number |
Mounting |
|
DPM-C520 (this page) |
DIN rail / panel |
| DPM-C501L |
DIN rail / panel |
| DRC-24V015W1RZ |
35 mm DIN rail (IEC 60715) |
| DRC-24V060W1RZ |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The DPM-C520 is the metering element in a Delta installation. It measures the electrical quantities of the supply and reports them for monitoring, so the current transformers and the wiring are sized to the ratings stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta DPM-C520
Delta DPM-C520 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number DPM-C520; record the nameplate data of the unit being replaced before selecting an equivalent.
- Supply voltage: 100...240 V AC / 24 V DC — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about DPM-C520
Q.Which official Delta document defines DPM-C520?
The official Delta document DPM-093AH20-02 (Operation Manual, issued 2020-07-31) classifies DPM-C520 as "Multi-Functional power meter". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=DPM-C520. Use that document as the authority for ratings and installation conditions before ordering.
Q.Before ordering DPM-C520, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for DPM-C520?
It is listed in the specification table for Delta DPM-C520 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For DPM-C520, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Delta DPM-C520. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of DPM-C520 before ordering?
Match the catalog number DPM-C520 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for DPM-C520?
Send the full catalog number DPM-C520, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta DPM-C520.