Delta · Delta switching power supply
CMMEC02 is a Delta Power Supply. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Efficiency≥90%
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Efficiency |
≥90% |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Product type and series follow the official Delta download-centre catalogue search for this model which lists CMMEC02 under the Delta product line; the product type published for this catalog number is "Power Supply". Source: https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMMEC02. Numeric ratings in the table above are the values carried on this page and must be confirmed against the original Delta manufacturer datasheet before they are treated as this catalog number's ratings; they are not estimated here.
Model comparison in the same family
| Delta Delta switching power supply variants |
| Catalog number |
Efficiency |
|
CMMEC02 (this page) |
≥90% |
| CMMEIP02 |
≥90% |
| CMM-EC03 |
≥90% |
| CMM-PN02 |
≥90% |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CMMEC02 is the power-supply element in a Delta control installation. It takes the incoming mains supply and provides the control supply that the mounted modules and the controller run on. Upstream protection and the supply conductor are sized to the input voltage range stated in the manufacturer documentation, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Delta CMMEC02
Delta CMMEC02 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number CMMEC02; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Efficiency: ≥90% — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about CMMEC02
Q.Which official Delta document defines CMMEC02?
The official Delta download-centre catalogue search for this model lists CMMEC02 under the Delta product line, and the product type published for this catalog number is "Power Supply". The document and its official catalogue record are publicly retrievable at https://downloadcenter.deltaww.com/en-US/DownloadCenter?q=CMMEC02. Use that document as the authority for ratings and installation conditions before ordering.
Q.Where can I find the operating temperature data for CMMEC02?
It is listed in the specification table for Delta CMMEC02 as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.For CMMEC02, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Delta CMMEC02. Confirm this figure against the unit currently in the panel.
Q.Can the CMMEC02 replace the unit currently installed in my panel?
Compare catalog number CMMEC02 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for CMMEC02?
Send the full catalog number CMMEC02, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Delta CMMEC02.