Schneider Electric LV426108 Circuit Breaker

Schneider Electric · ComPacT circuit breaker

LV426108 is a Schneider Electric circuit breaker with Rated current Ie 125 A; Rated operational voltage up to 690 V AC; Breaking capacity Icu/Ics 100% Icu. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

• Rated current Ie125 A
• Rated operational voltageup to 690 V AC
• Breaking capacity Icu/Ics100% Icu
• Enclosure ratingIP40 conforming to IEC 60529

Specifications

Values follow the Schneider Electric ComPacT circuit breaker specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The LV426108 is the device-level element in a Schneider Electric circuit breaker installation. It receives the field signals and control supply listed above — up to 690 V AC — and switches or conditions the load within the 125 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides By screws (plate) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Schneider Electric LV426108

Schneider Electric LV426108 — Circuit breaker providing branch-circuit overload and short-circuit protection in distribution boards and panel feeders. The figures below are taken from the specification table on this page for catalog number LV426108; verify the catalog number against your bill of materials before requesting a quotation.

• Rated impulse withstand Uimp: 8 kV conforming to IEC 60947-2 — Confirm the revision of the installed unit before a like-for-like replacement.
• Enclosure rating: IP40 conforming to IEC 60529 — Use it as the reference when cross-checking a current-production equivalent.
• Breaking capacity Icu/Ics: 100% Icu — Verify it in the project documentation before confirming the order.
• Certifications: CCC, CE, EAC, marine approvals — Check this value against the nameplate of the installed unit before ordering.

Cross-check the ratings above with the installed device before confirming the order.

Common questions about LV426108