ProSoft Technology · Wireless Module
RLX2-IHW-A is a ProSoft Technology industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature -40...+75 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-40...+75 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-40...+75 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Wireless Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ProSoft Technology Wireless Module variants |
| Catalog number |
Mounting |
|
RLX2-IHW-A (this page) |
DIN rail / panel |
| RLX2-IHNF-A |
DIN rail / panel |
| RLX2-IHNF-E |
DIN rail / panel |
| RLX2-IHNF-W |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The RLX2-IHW-A is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial RLX2-IHW-A
Industrial RLX2-IHW-A — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number RLX2-IHW-A; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: DIN rail / panel — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -40...+75 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about RLX2-IHW-A
Q.Which value is published under operating temperature for catalog number RLX2-IHW-A?
For RLX2-IHW-A, operating temperature is given as -40...+75 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering RLX2-IHW-A, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for RLX2-IHW-A?
It is listed in the specification table for Industrial RLX2-IHW-A as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the RLX2-IHW-A replace the unit currently installed in my panel?
Compare catalog number RLX2-IHW-A and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for RLX2-IHW-A?
Send the full catalog number RLX2-IHW-A, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial RLX2-IHW-A.