ProSoft Technology · Gateway
ICX30-HWC is a ProSoft Technology industrial component with Supply voltage 10 to 24 VDC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10 to 24 VDC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
10 to 24 VDC |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology Gateway specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ProSoft Technology Gateway variants |
| Catalog number |
Mounting |
|
ICX30-HWC (this page) |
DIN rail / panel |
| ICX35-HWC-A |
DIN rail / panel |
| ICX35-HWC-E |
DIN rail / panel |
| 4202-PRNT4-WEB |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The ICX30-HWC is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — 10 to 24 VDC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial ICX30-HWC
Industrial ICX30-HWC — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number ICX30-HWC; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about ICX30-HWC
Q.Before ordering ICX30-HWC, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the operating temperature data for ICX30-HWC?
It is listed in the specification table for Industrial ICX30-HWC as 0...+55 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.For ICX30-HWC, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Industrial ICX30-HWC. Compare it with the nameplate of the installed unit before ordering.
Q.Can the ICX30-HWC replace the unit currently installed in my panel?
Compare catalog number ICX30-HWC and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for ICX30-HWC?
Send the full catalog number ICX30-HWC, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Industrial ICX30-HWC.