ProSoft Technology · ControlLogix communication module
MVI56-MCMR is a ProSoft Technology industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+60 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+60 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Response time |
< 1 ms |
| Mechanical |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the ProSoft Technology ControlLogix communication module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| ProSoft Technology ControlLogix communication module variants |
| Catalog number |
Mounting |
|
MVI56-MCMR (this page) |
DIN rail / panel |
| MVI56-MCMRCC |
DIN rail / panel |
| MVI56-MCM |
DIN rail / panel |
| MVI56-MBP |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The MVI56-MCMR is the device-level element in a ProSoft Technology industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Industrial MVI56-MCMR
Industrial MVI56-MCMR — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number MVI56-MCMR; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+60 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Response time: < 1 ms — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about MVI56-MCMR
Q.Which value is published under operating temperature for catalog number MVI56-MCMR?
For MVI56-MCMR, operating temperature is given as 0...+60 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering MVI56-MCMR, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Confirm this figure against the unit currently in the panel.
Q.Where can I find the enclosure rating data for MVI56-MCMR?
It is listed in the specification table for Industrial MVI56-MCMR as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of MVI56-MCMR before ordering?
Match the catalog number MVI56-MCMR and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the MVI56-MCMR replace the unit currently installed in my panel?
Compare catalog number MVI56-MCMR and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.