Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Pilz · Safety Relay
774130 is a Pilz circuit breaker with Breaking capacity Icu/Ics modules or relays/contactors with; Enclosure rating IP20 (IEC 60529); Mounting 35 mm DIN rail (IEC 60715). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated insulation voltage Ui | 690 V (IEC 60947-4-1) |
|---|---|
| Rated impulse withstand Uimp | 6 kV (IEC 60947-4-1) |
| Breaking capacity Icu/Ics | modules or relays/contactors with |
| Frequency | 50 ... 60 Hz |
| Rated torque | 0.6 Nm (screws) |
| Mechanical | |
| Dimensions (H x W x D) | 87 x 22.5 x 121 mm |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | - SIMATIC S7 |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+60 °C (IEC 60068-2-1) |
| Storage temperature | -40 ... +85 °C |
| Certifications | CE, cULus, TÜV |
Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Pilz Safety Relay variants | |||
| Catalog number | Mounting | ||
|---|---|---|---|
| 774130 (this page) | 35 mm DIN rail (IEC 60715) | ||
| 774131 | DIN rail / panel | ||
| 774133 | DIN rail / panel | ||
| 774059 | 35 mm DIN rail (IEC 60715) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 774130 is the device-level element in a Pilz circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Pilz 774130 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 774130; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Before ordering 774130, which rated impulse withstand Uimp entry should be checked?
The rated impulse withstand Uimp entry quoted above is 6 kV (IEC 60947-4-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the dimensions (H x W x D) data for 774130?
It is listed in the specification table for Pilz 774130 as 87 x 22.5 x 121 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 774130, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Pilz 774130. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 774130?
Send the full catalog number 774130, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Pilz 774130.
Q.How do I confirm compatibility of 774130 before ordering?
Match the catalog number 774130 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
