Pilz · Safety Relay
772140 is a Pilz industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, cULus, TÜV
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Mechanical |
| Dimensions (H x W x D) |
120 mm |
| Weight |
105 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
EN 60068-2-1/-2 |
| Certifications |
CE, cULus, TÜV |
Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Pilz Safety Relay variants |
| Catalog number |
Mounting |
|
772140 (this page) |
DIN rail / panel |
| 772142 |
DIN rail / panel |
| 772143 |
DIN rail / panel |
| 772100 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 772140 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Pilz 772140
Pilz 772140 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 772140; verify the catalog number against your bill of materials before requesting a quotation.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 120 mm — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 105 g — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 772140
Q.Which value is published under weight for catalog number 772140?
For 772140, weight is given as 105 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 772140, which rated insulation voltage Ui entry should be checked?
The rated insulation voltage Ui entry quoted above is 690 V (IEC 60947-4-1). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the storage temperature data for 772140?
It is listed in the specification table for Pilz 772140 as EN 60068-2-1/-2. Confirm this figure against the unit currently in the panel.
Q.Can the 772140 replace the unit currently installed in my panel?
Compare catalog number 772140 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 772140?
Send the full catalog number 772140, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Pilz 772140.