Pilz 772137 Safety Relay

SKU: 772137
Regular price $198.56
In stock (81 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Pilz · Safety Relay

772137 is a Pilz industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Enclosure ratingIP20 (IEC 60529)
  • Operating temperature0...+55 °C (IEC 60068-2-1)
  • MountingDIN rail / panel
  • CertificationsCE, cULus, TÜV

Specifications

Electrical
Rated insulation voltage Ui 690 V (IEC 60947-4-1)
Rated impulse withstand Uimp 6 kV (IEC 60947-4-1)
I/O and communication
Bus interface EtherNet/IP
Mechanical
Dimensions (H x W x D) 110.4 mm
Weight 100 g
Mounting DIN rail / panel
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, cULus, TÜV

Values follow the Pilz Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Pilz Safety Relay variants
Catalog number Mounting
772137 (this page) DIN rail / panel
772136 DIN rail / panel
772138 DIN rail / panel
772100 DIN rail / panel

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 772137 is the device-level element in a Pilz industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Pilz 772137

Pilz 772137 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 772137; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

  • Weight: 100 g — Match it to the existing panel and upstream protection.
  • Rated impulse withstand Uimp: 6 kV (IEC 60947-4-1) — Record it with the other nameplate data when sourcing a replacement.
  • Bus interface: EtherNet/IP — Confirm the revision of the installed unit before a like-for-like replacement.
  • Dimensions (H x W x D): 110.4 mm — Use it as the reference when cross-checking a current-production equivalent.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 772137

Q.Where can I find the enclosure rating data for 772137?

It is listed in the specification table for Pilz 772137 as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.

Q.For 772137, what does the specification table state about rated impulse withstand Uimp?

The specification table lists rated impulse withstand Uimp = 6 kV (IEC 60947-4-1) for Pilz 772137. Check the revision of the installed unit if the catalog number has been superseded.

Q.Which value is published under rated insulation voltage Ui for catalog number 772137?

For 772137, rated insulation voltage Ui is given as 690 V (IEC 60947-4-1). Compare it with the nameplate of the installed unit before ordering.

Q.How do I confirm compatibility of 772137 before ordering?

Match the catalog number 772137 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.What should I include in an enquiry for 772137?

Send the full catalog number 772137, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Pilz 772137.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!