Phoenix Contact 2907980 Energy Meter

SKU: 2907980
Regular price $763.82
In stock (55 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Energy Meter

2907980 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics up to 63rd harmonic; Supply voltage 100 V AC ... 230 V AC (±20 %). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Tripping characteristic8 mm
  • Breaking capacity Icu/Icsup to 63rd harmonic
  • Supply voltage100 V AC ... 230 V AC (±20 %)
  • Enclosure ratingIP20 (IEC 60529)

Specifications

Electrical
Breaking capacity Icu/Ics up to 63rd harmonic
Tripping characteristic 8 mm
Supply voltage 100 V AC ... 230 V AC (±20 %)
Input voltage range 18 V AC ... 690 V AC (Phase/Phase)
Power consumption ≤ 4 W
Frequency 50 Hz ... 60 Hz (AC sine)
Overload capacity 6 A (I max )
Rated torque 0.5 Nm ... 0.6 Nm
Rated speed 10 Mbps
I/O and communication
Response time 10 mA (1 A)
Mechanical
Weight 336.4 g
Mounting DIN rail / panel
Terminal wire size 0.2 mm² ... 6 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity ≤ 95 % (non-condensing)

Values follow the Phoenix Contact Energy Meter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Energy Meter variants
Catalog number Tripping characteristic Breaking capacity Icu/Ics
2907980 (this page) 8 mm up to 63rd harmonic
2907983 8 mm up to 63rd harmonic
2907945 8 mm up to 63rd harmonic
2907946 8 mm up to 63rd harmonic

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2907980 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 100 V AC ... 230 V AC (±20 %) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2907980

Phoenix Contact 2907980 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2907980; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Terminal wire size: 0.2 mm² ... 6 mm² — Match it to the existing panel and upstream protection.
  • Frequency: 50 Hz ... 60 Hz (AC sine) — Record it with the other nameplate data when sourcing a replacement.
  • Rated speed: 10 Mbps — Confirm the revision of the installed unit before a like-for-like replacement.
  • Input voltage range: 18 V AC ... 690 V AC (Phase/Phase) — Use it as the reference when cross-checking a current-production equivalent.

Cross-check the ratings above with the installed device before confirming the order.

Common questions about 2907980

Q.Where can I find the input voltage range data for 2907980?

It is listed in the specification table for Phoenix Contact 2907980 as 18 V AC ... 690 V AC (Phase/Phase). Check the revision of the installed unit if the catalog number has been superseded.

Q.For 2907980, what does the specification table state about certifications?

The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2907980. Compare it with the nameplate of the installed unit before ordering.

Q.Which value is published under response time for catalog number 2907980?

For 2907980, response time is given as 10 mA (1 A). Confirm this figure against the unit currently in the panel.

Q.What should I include in an enquiry for 2907980?

Send the full catalog number 2907980, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2907980.

Q.How do I confirm compatibility of 2907980 before ordering?

Match the catalog number 2907980 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!