Phoenix Contact · Energy Meter
2907946 is a Phoenix Contact circuit breaker with Tripping characteristic 8 mm; Breaking capacity Icu/Ics up to 63rd harmonic; Supply voltage 100 V AC ... 400 V AC (±20 %). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic8 mm
-
Breaking capacity Icu/Icsup to 63rd harmonic
-
Supply voltage100 V AC ... 400 V AC (±20 %)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
up to 63rd harmonic |
| Tripping characteristic |
8 mm |
| Supply voltage |
100 V AC ... 400 V AC (±20 %) |
| Input voltage range |
18 V AC ... 690 V AC (Phase/Phase) |
| Power consumption |
≤ 4 W |
| Frequency |
50 Hz ... 60 Hz (AC sine) |
| Overload capacity |
6 A (I max ) |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Rated speed |
10 Mbps |
| I/O and communication |
| Response time |
10 mA (1 A) |
| Mechanical |
| Weight |
518 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
≤ 95 % (non-condensing) |
Values follow the Phoenix Contact Energy Meter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Energy Meter variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
2907946 (this page) |
8 mm |
up to 63rd harmonic |
| 2907945 |
8 mm |
up to 63rd harmonic |
| 2907980 |
8 mm |
up to 63rd harmonic |
| 2907983 |
8 mm |
up to 63rd harmonic |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2907946 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 100 V AC ... 400 V AC (±20 %) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2907946
Phoenix Contact 2907946 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2907946; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated torque: 0.5 Nm ... 0.6 Nm — Match it to the existing panel and upstream protection.
- Power consumption: ≤ 4 W — Record it with the other nameplate data when sourcing a replacement.
- Overload capacity: 6 A (I max ) — Confirm the revision of the installed unit before a like-for-like replacement.
- Input voltage range: 18 V AC ... 690 V AC (Phase/Phase) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2907946
Q.Where can I find the weight data for 2907946?
It is listed in the specification table for Phoenix Contact 2907946 as 518 g. Confirm this figure against the unit currently in the panel.
Q.For 2907946, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = up to 63rd harmonic for Phoenix Contact 2907946. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under tripping characteristic for catalog number 2907946?
For 2907946, tripping characteristic is given as 8 mm. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2907946?
Send the full catalog number 2907946, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2907946.
Q.Can the 2907946 replace the unit currently installed in my panel?
Compare catalog number 2907946 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.