Phoenix Contact · Safety Relay
2905669 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics yes; Supply voltage 24 V DC -20 % ... +25 %. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic7 mm
-
Breaking capacity Icu/Icsyes
-
Supply voltage24 V DC -20 % ... +25 %
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated insulation voltage Ui |
690 V (IEC 60947-4-1) |
| Rated impulse withstand Uimp |
6 kV (IEC 60947-4-1) |
| Breaking capacity Icu/Ics |
yes |
| Tripping characteristic |
7 mm |
| Supply voltage |
24 V DC -20 % ... +25 % |
| Output voltage |
≥ 4.64 V DC (25.1 mA) |
| Output current |
37.4 mA |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Mechanical |
| Weight |
172.7 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Safety Relay variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
2905669 (this page) |
7 mm |
yes |
| 2905674 |
10 mm |
yes |
| 2905136 |
9 mm |
— |
| 2905195 |
10 mm |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2905669 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC -20 % ... +25 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2905669
Phoenix Contact 2905669 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2905669; verify the catalog number against your bill of materials before requesting a quotation.
- Output voltage: ≥ 4.64 V DC (25.1 mA) — Confirm the revision of the installed unit before a like-for-like replacement.
- Tripping characteristic: 7 mm — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 10 % ... 95 % (non-condensing) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0.2 mm² ... 2.5 mm² — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2905669
Q.Where can I find the enclosure rating data for 2905669?
It is listed in the specification table for Phoenix Contact 2905669 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2905669, what does the specification table state about humidity?
The specification table lists humidity = 10 % ... 95 % (non-condensing) for Phoenix Contact 2905669. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under output current for catalog number 2905669?
For 2905669, output current is given as 37.4 mA. Confirm this figure against the unit currently in the panel.
Q.Can the 2905669 replace the unit currently installed in my panel?
Compare catalog number 2905669 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2905669?
Send the full catalog number 2905669, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2905669.