Phoenix Contact 2905674 Safety Relay

SKU: 2905674
Regular price $426.99
In stock (99 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Safety Relay

2905674 is a Phoenix Contact circuit breaker with Tripping characteristic 10 mm; Breaking capacity Icu/Ics yes; Supply voltage 24 V DC -20 % ... +25 %. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Tripping characteristic10 mm
  • Breaking capacity Icu/Icsyes
  • Supply voltage24 V DC -20 % ... +25 %
  • Enclosure ratingIP20 (IEC 60529)

Specifications

Electrical
Rated insulation voltage Ui 690 V (IEC 60947-4-1)
Rated impulse withstand Uimp 6 kV (IEC 60947-4-1)
Breaking capacity Icu/Ics yes
Tripping characteristic 10 mm
Supply voltage 24 V DC -20 % ... +25 %
Output voltage ≥ 4.64 V DC (25.1 mA)
Output current 37.4 mA
Mechanical
Weight 172.1 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 2.5 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature -25...+60 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 10 % ... 95 % (non-condensing)

Values follow the Phoenix Contact Safety Relay specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Safety Relay variants
Catalog number Tripping characteristic Breaking capacity Icu/Ics
2905674 (this page) 10 mm yes
2905669 7 mm yes
2905136 9 mm —
2905195 10 mm —

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2905674 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC -20 % ... +25 % — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2905674

Phoenix Contact 2905674 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2905674; verify the catalog number against your bill of materials before requesting a quotation.

  • Operating temperature: -25...+60 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
  • Humidity: 10 % ... 95 % (non-condensing) — Use it as the reference when cross-checking a current-production equivalent.
  • Breaking capacity Icu/Ics: yes — Verify it in the project documentation before confirming the order.
  • Rated insulation voltage Ui: 690 V (IEC 60947-4-1) — Check this value against the nameplate of the installed unit before ordering.

For a discontinued unit, match function and electrical ratings rather than the label alone.

Common questions about 2905674

Q.Which value is published under output current for catalog number 2905674?

For 2905674, output current is given as 37.4 mA. Compare it with the nameplate of the installed unit before ordering.

Q.Before ordering 2905674, which weight entry should be checked?

The weight entry quoted above is 172.1 g. Confirm this figure against the unit currently in the panel.

Q.Where can I find the tripping characteristic data for 2905674?

It is listed in the specification table for Phoenix Contact 2905674 as 10 mm. Use the value as the reference when sourcing a current-production equivalent.

Q.What should I include in an enquiry for 2905674?

Send the full catalog number 2905674, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2905674.

Q.How do I confirm compatibility of 2905674 before ordering?

Match the catalog number 2905674 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!