Phoenix Contact · PLC Controller
2403160 is a Phoenix Contact PLC controller with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports PROFINET, Modbus, Ethernet. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Bus interface |
max. 63 (observe current consumption) |
| Protocols |
BACnet/IP |
| Mechanical |
| Weight |
243 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact PLC Controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact PLC Controller variants |
| Catalog number |
Supply voltage |
|
2403160 (this page) |
24 V DC (IEC 61131-2) |
| 2404267 |
24 V DC (IEC 61131-2) |
| 2700973 |
24 V DC (IEC 61131-2) |
| 2700975 |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2403160 is the device-level element in a Phoenix Contact PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2403160
Phoenix Contact 2403160 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 2403160; record the nameplate data of the unit being replaced before selecting an equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Weight: 243 g — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2403160
Q.Which value is published under weight for catalog number 2403160?
For 2403160, weight is given as 243 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2403160, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the protocols data for 2403160?
It is listed in the specification table for Phoenix Contact 2403160 as BACnet/IP. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2403160 before ordering?
Match the catalog number 2403160 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2403160 replace the unit currently installed in my panel?
Compare catalog number 2403160 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.