Phoenix Contact · Terminal Block
1843664 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
160 V |
| Rated impulse withstand Uimp |
2.95 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
1.39 kV |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.8 x 0.8 mm |
| Weight |
1.89 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1843664 (this page) |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1843648 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1844236 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1844252 |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1843664 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1843664
Phoenix Contact 1843664 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1843664; record the nameplate data of the unit being replaced before selecting an equivalent.
- Humidity: 30 % ... 70 % — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 1.89 g — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -40 °C ... 70 °C — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1843664
Q.For 1843664, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 41 A (IEC 60947-7-1) for Phoenix Contact 1843664. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated speed for catalog number 1843664?
For 1843664, rated speed is given as 1 octave/min. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1843664, which frequency entry should be checked?
The frequency entry quoted above is 1.39 kV. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1843664 before ordering?
Match the catalog number 1843664 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1843664 replace the unit currently installed in my panel?
Compare catalog number 1843664 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.