Phoenix Contact · Terminal Block
1844252 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
160 V |
| Rated impulse withstand Uimp |
2.95 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
1.39 kV |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.8 x 0.8 mm |
| Weight |
1.648 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1844252 (this page) |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1844236 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1843648 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1843664 |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1844252 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1844252
Phoenix Contact 1844252 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1844252; record the nameplate data of the unit being replaced before selecting an equivalent.
- Humidity: 30 % ... 70 % — Check this value against the nameplate of the installed unit before ordering.
- Rated impulse withstand Uimp: 2.95 kV — Match it to the existing panel and upstream protection.
- Frequency: 1.39 kV — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -40 °C ... 70 °C — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1844252
Q.Before ordering 1844252, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Where can I find the weight data for 1844252?
It is listed in the specification table for Phoenix Contact 1844252 as 1.648 g. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1844252, what does the specification table state about humidity?
The specification table lists humidity = 30 % ... 70 % for Phoenix Contact 1844252. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1844252 before ordering?
Match the catalog number 1844252 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1844252 replace the unit currently installed in my panel?
Compare catalog number 1844252 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.