Phoenix Contact · Pluggable Terminal Block
1829426 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
160 V |
| Rated impulse withstand Uimp |
2.95 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
1.39 kV |
| Rated torque |
0.3 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.8 x 2.8 mm |
| Weight |
7.6 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Pluggable Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Pluggable Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1829426 (this page) |
Tin-plated |
800 V (IEC 60947-7-1) |
| 0707280 |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1829426 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1829426
Phoenix Contact 1829426 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1829426; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Rated insulation voltage Ui: 160 V — Verify it in the project documentation before confirming the order.
- Humidity: 30 % ... 70 % — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -40 °C ... 70 °C — Match it to the existing panel and upstream protection.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1829426
Q.For 1829426, what does the specification table state about weight?
The specification table lists weight = 7.6 g for Phoenix Contact 1829426. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated speed for catalog number 1829426?
For 1829426, rated speed is given as 1 octave/min. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1829426, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 0.8 x 2.8 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1829426 replace the unit currently installed in my panel?
Compare catalog number 1829426 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1829426 before ordering?
Match the catalog number 1829426 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.