Phoenix Contact · Pluggable Terminal Block
0707280 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
320 V |
| Rated impulse withstand Uimp |
4.8 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
2.21 kV |
| Rated torque |
0.3 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.8 x 2.8 mm |
| Weight |
6.95 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Pluggable Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Pluggable Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
0707280 (this page) |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1829426 |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0707280 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0707280
Phoenix Contact 0707280 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0707280; verify the catalog number against your bill of materials before requesting a quotation.
- Breaking capacity Icu/Ics: Tin-plated — Use it as the reference when cross-checking a current-production equivalent.
- Frequency: 2.21 kV — Verify it in the project documentation before confirming the order.
- Humidity: 30 % ... 70 % — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: -40 °C ... 70 °C — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 0707280
Q.Where can I find the rated current Ie data for 0707280?
It is listed in the specification table for Phoenix Contact 0707280 as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 0707280, what does the specification table state about rated operational voltage?
The specification table lists rated operational voltage = 800 V (IEC 60947-7-1) for Phoenix Contact 0707280. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated insulation voltage Ui for catalog number 0707280?
For 0707280, rated insulation voltage Ui is given as 320 V. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 0707280?
Send the full catalog number 0707280, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0707280.
Q.How do I confirm compatibility of 0707280 before ordering?
Match the catalog number 0707280 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.