Phoenix Contact · Terminal Block
1808640 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 10 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic10 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/Icshot-dip tin-plated
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
320 V |
| Breaking capacity Icu/Ics |
hot-dip tin-plated |
| Tripping characteristic |
10 mm |
| Mechanical |
| Weight |
18.2 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (4 µm - 8 µm Sn) |
| Terminal wire size |
0 ° |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1808640 (this page) |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
| 1803332 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1803358 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1803374 |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1808640 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1808640
Phoenix Contact 1808640 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1808640; verify the catalog number against your bill of materials before requesting a quotation.
- Weight: 18.2 g — Match it to the existing panel and upstream protection.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 10 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1808640
Q.Where can I find the rated operational voltage data for 1808640?
It is listed in the specification table for Phoenix Contact 1808640 as 800 V (IEC 60947-7-1). Confirm this figure against the unit currently in the panel.
Q.For 1808640, what does the specification table state about weight?
The specification table lists weight = 18.2 g for Phoenix Contact 1808640. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated current Ie for catalog number 1808640?
For 1808640, rated current Ie is given as up to 41 A (IEC 60947-7-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1808640?
Send the full catalog number 1808640, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1808640.
Q.How do I confirm compatibility of 1808640 before ordering?
Match the catalog number 1808640 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.