Phoenix Contact · Terminal Block
1803374 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
160 V |
| Rated impulse withstand Uimp |
2.95 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Frequency |
1.39 kV |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.8 x 0.8 mm |
| Weight |
3.306 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1803374 (this page) |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1803332 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1803358 |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1804917 |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1803374 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1803374
Phoenix Contact 1803374 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1803374; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Verify it in the project documentation before confirming the order.
- Rated speed: 1 octave/min — Check this value against the nameplate of the installed unit before ordering.
- Humidity: 30 % ... 70 % — Match it to the existing panel and upstream protection.
- Weight: 3.306 g — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1803374
Q.Before ordering 1803374, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated insulation voltage Ui data for 1803374?
It is listed in the specification table for Phoenix Contact 1803374 as 160 V. Compare it with the nameplate of the installed unit before ordering.
Q.For 1803374, what does the specification table state about rated speed?
The specification table lists rated speed = 1 octave/min for Phoenix Contact 1803374. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1803374 before ordering?
Match the catalog number 1803374 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1803374 replace the unit currently installed in my panel?
Compare catalog number 1803374 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.