Phoenix Contact 1803358 Terminal Block

SKU: 1803358
Regular price $324.42
In stock (97 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

1803358 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Breaking capacity Icu/IcsTin-plated
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 160 V
Rated impulse withstand Uimp 2.95 kV
Breaking capacity Icu/Ics Tin-plated
Frequency 1.39 kV
Rated speed 1 octave/min
Mechanical
Dimensions (H x W x D) 0.8 x 0.8 mm
Weight 2.768 g
Mounting 35 mm DIN rail (IEC 60715)
Environment and compliance
Operating temperature -40 °C ... 70 °C
Certifications CE, UL, cULus
Humidity 30 % ... 70 %

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Breaking capacity Icu/Ics Rated operational voltage
1803358 (this page) Tin-plated 800 V (IEC 60947-7-1)
1803332 Tin-plated 800 V (IEC 60947-7-1)
1803374 Tin-plated 800 V (IEC 60947-7-1)
1804917 hot-dip tin-plated 800 V (IEC 60947-7-1)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1803358 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1803358

Phoenix Contact 1803358 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1803358; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.

  • Breaking capacity Icu/Ics: Tin-plated — Check this value against the nameplate of the installed unit before ordering.
  • Rated impulse withstand Uimp: 2.95 kV — Match it to the existing panel and upstream protection.
  • Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
  • Frequency: 1.39 kV — Confirm the revision of the installed unit before a like-for-like replacement.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 1803358

Q.Which value is published under mounting for catalog number 1803358?

For 1803358, mounting is given as 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.

Q.Before ordering 1803358, which rated current Ie entry should be checked?

The rated current Ie entry quoted above is up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.

Q.Where can I find the rated insulation voltage Ui data for 1803358?

It is listed in the specification table for Phoenix Contact 1803358 as 160 V. Confirm this figure against the unit currently in the panel.

Q.What should I include in an enquiry for 1803358?

Send the full catalog number 1803358, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1803358.

Q.How do I confirm compatibility of 1803358 before ordering?

Match the catalog number 1803358 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!