Phoenix Contact · Communication Module
1786925 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Rated operational voltage 250 V; Breaking capacity Icu/Ics hot-dip tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic7 mm
-
Rated operational voltage250 V
-
Breaking capacity Icu/Icshot-dip tin-plated
-
Supply voltage24 V DC (IEC 61131-2)
Specifications
| Electrical |
| Rated operational voltage |
250 V |
| Rated insulation voltage Ui |
250 V |
| Rated impulse withstand Uimp |
4.8 kV |
| Breaking capacity Icu/Ics |
hot-dip tin-plated |
| Tripping characteristic |
7 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Frequency |
2.21 kV |
| Rated torque |
0.3 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Weight |
19.97 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (5 µm - 7 µm Sn) |
| Terminal wire size |
0 ° |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Communication Module variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1786925 (this page) |
7 mm |
hot-dip tin-plated |
250 V |
| 1786394 |
7 mm |
Tin-plated |
250 V |
| 1004066 |
8 mm |
Yellow LED |
— |
| 1079241 |
8 mm |
— |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1786925 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the 250 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1786925
Phoenix Contact 1786925 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1786925; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated impulse withstand Uimp: 4.8 kV — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal type: Tin (5 µm - 7 µm Sn) — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0 ° — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1786925
Q.Where can I find the certifications data for 1786925?
It is listed in the specification table for Phoenix Contact 1786925 as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.For 1786925, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = 7 mm for Phoenix Contact 1786925. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated insulation voltage Ui for catalog number 1786925?
For 1786925, rated insulation voltage Ui is given as 250 V. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1786925 before ordering?
Match the catalog number 1786925 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1786925?
Send the full catalog number 1786925, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1786925.