Phoenix Contact · Communication Module
1786394 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Rated operational voltage 250 V; Breaking capacity Icu/Ics Tin-plated. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic7 mm
-
Rated operational voltage250 V
-
Breaking capacity Icu/IcsTin-plated
-
Supply voltage24 V DC (IEC 61131-2)
Specifications
| Electrical |
| Rated operational voltage |
250 V |
| Rated insulation voltage Ui |
250 V |
| Rated impulse withstand Uimp |
4.8 kV |
| Breaking capacity Icu/Ics |
Tin-plated |
| Tripping characteristic |
7 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Frequency |
2.21 kV |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Weight |
40.07 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (5 µm - 7 µm Sn) |
| Terminal wire size |
0 ° |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Communication Module variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1786394 (this page) |
7 mm |
Tin-plated |
250 V |
| 1786925 |
7 mm |
hot-dip tin-plated |
250 V |
| 1004066 |
8 mm |
Yellow LED |
— |
| 1079241 |
8 mm |
— |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1786394 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the 250 V ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1786394
Phoenix Contact 1786394 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1786394; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Weight: 40.07 g — Check this value against the nameplate of the installed unit before ordering.
- Humidity: 30 % ... 70 % — Match it to the existing panel and upstream protection.
- Rated impulse withstand Uimp: 4.8 kV — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0 ° — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1786394
Q.Where can I find the terminal type data for 1786394?
It is listed in the specification table for Phoenix Contact 1786394 as Tin (5 µm - 7 µm Sn). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1786394, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0 ° for Phoenix Contact 1786394. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated impulse withstand Uimp for catalog number 1786394?
For 1786394, rated impulse withstand Uimp is given as 4.8 kV. Confirm this figure against the unit currently in the panel.
Q.Can the 1786394 replace the unit currently installed in my panel?
Compare catalog number 1786394 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1786394?
Send the full catalog number 1786394, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1786394.