Phoenix Contact · Communication Module
1079241 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Tripping characteristic |
8 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Input voltage range |
-3 V DC ... 5 V DC |
| Power consumption |
max. 360 mW |
| Mechanical |
| Weight |
48 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.25 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
| Degree of protection |
min. IP54 |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Communication Module variants |
| Catalog number |
Mounting |
|
1079241 (this page) |
35 mm DIN rail (IEC 60715) |
| 1079660 |
DIN rail / panel |
| 1004066 |
35 mm DIN rail (IEC 60715) |
| 1081063 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1079241 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1079241
Phoenix Contact 1079241 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1079241; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Supply voltage: 24 V DC (IEC 61131-2) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Weight: 48 g — Check this value against the nameplate of the installed unit before ordering.
- Terminal wire size: 0.25 mm² ... 1.5 mm² — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1079241
Q.Which value is published under enclosure rating for catalog number 1079241?
For 1079241, enclosure rating is given as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1079241, which degree of protection entry should be checked?
The degree of protection entry quoted above is min. IP54. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the humidity data for 1079241?
It is listed in the specification table for Phoenix Contact 1079241 as 5 % ... 95 % (non-condensing). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1079241?
Send the full catalog number 1079241, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1079241.
Q.How do I confirm compatibility of 1079241 before ordering?
Match the catalog number 1079241 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.