Phoenix Contact · Communication Module
1079660 is a Phoenix Contact industrial component with Rated current Ie 32 A (observe derating); Rated operational voltage 400 V (III/2); Supply voltage 24 V DC (IEC 61131-2). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie32 A (observe derating)
-
Rated operational voltage400 V (III/2)
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
32 A (observe derating) |
| Rated operational voltage |
400 V (III/2) |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Mechanical |
| Weight |
774 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Communication Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Communication Module variants |
| Catalog number |
Mounting |
|
1079660 (this page) |
DIN rail / panel |
| 1079241 |
35 mm DIN rail (IEC 60715) |
| 1004066 |
35 mm DIN rail (IEC 60715) |
| 1081063 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1079660 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the 32 A (observe derating) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1079660
Phoenix Contact 1079660 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1079660; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Rated current Ie: 32 A (observe derating) — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1079660
Q.Before ordering 1079660, which operating temperature entry should be checked?
The operating temperature entry quoted above is 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Where can I find the certifications data for 1079660?
It is listed in the specification table for Phoenix Contact 1079660 as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1079660, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 1079660. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1079660?
Send the full catalog number 1079660, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1079660.
Q.How do I confirm compatibility of 1079660 before ordering?
Match the catalog number 1079660 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.