Phoenix Contact · Terminal Block
1725656 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 4.5 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic4.5 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
63 V |
| Breaking capacity Icu/Ics |
Tin-plated |
| Tripping characteristic |
4.5 mm |
| Frequency |
10 - 150 - 10 Hz |
| Rated torque |
0.12 Nm ... 0.15 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Dimensions (H x W x D) |
0.5 x 0.9 mm |
| Weight |
0.621 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (5 µm - 7 µm Sn) |
| Terminal wire size |
0.14 mm² ... 0.5 mm² |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1725656 (this page) |
4.5 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1725041 |
7 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1725711 |
4.5 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1720017 |
8 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1725656 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1725656
Phoenix Contact 1725656 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1725656; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 0.5 x 0.9 mm — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 30 % ... 70 % — Verify it in the project documentation before confirming the order.
- Weight: 0.621 g — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1725656
Q.Where can I find the rated current Ie data for 1725656?
It is listed in the specification table for Phoenix Contact 1725656 as up to 41 A (IEC 60947-7-1). Confirm this figure against the unit currently in the panel.
Q.For 1725656, what does the specification table state about dimensions (H x W x D)?
The specification table lists dimensions (H x W x D) = 0.5 x 0.9 mm for Phoenix Contact 1725656. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under humidity for catalog number 1725656?
For 1725656, humidity is given as 30 % ... 70 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 1725656 before ordering?
Match the catalog number 1725656 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1725656 replace the unit currently installed in my panel?
Compare catalog number 1725656 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.