Phoenix Contact · Terminal Block
1720017 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 8 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic8 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsTin-plated
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
690 V |
| Breaking capacity Icu/Ics |
Tin-plated |
| Tripping characteristic |
8 mm |
| Rated torque |
0.5 Nm ... 0.6 Nm |
| Mechanical |
| Dimensions (H x W x D) |
0.9 x 0.9 mm |
| Weight |
6.523 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (5 µm - 7 µm Sn) |
| Terminal wire size |
0.2 mm² ... 6 mm² |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1720017 (this page) |
8 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1720020 |
8 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1723014 |
7 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
| 1725041 |
7 mm |
Tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1720017 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1720017
Phoenix Contact 1720017 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1720017; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated torque: 0.5 Nm ... 0.6 Nm — Confirm the revision of the installed unit before a like-for-like replacement.
- Humidity: 30 % ... 70 % — Use it as the reference when cross-checking a current-production equivalent.
- Tripping characteristic: 8 mm — Verify it in the project documentation before confirming the order.
- Dimensions (H x W x D): 0.9 x 0.9 mm — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1720017
Q.Which value is published under certifications for catalog number 1720017?
For 1720017, certifications is given as CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1720017, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 8 mm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the terminal type data for 1720017?
It is listed in the specification table for Phoenix Contact 1720017 as Tin (5 µm - 7 µm Sn). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 1720017?
Send the full catalog number 1720017, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1720017.
Q.How do I confirm compatibility of 1720017 before ordering?
Match the catalog number 1720017 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.