Phoenix Contact · Power Distributor
1692501 is a Phoenix Contact circuit breaker with Rated current Ie 6 A; Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics Supply voltage Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie6 A
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
6 A |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.2 Nm |
| Mechanical |
| Weight |
666.3 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.34 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1692501 (this page) |
Supply voltage Green LED |
<= 440 V AC |
| 1692404 |
Supply voltage Green LED |
<= 440 V AC |
| 1692433 |
Supply voltage Green LED |
<= 440 V AC |
| 1692459 |
Supply voltage Green LED |
<= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1692501 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 6 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1692501
Phoenix Contact 1692501 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1692501; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: -25...+60 °C — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: 6 A — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1692501
Q.Before ordering 1692501, which rated torque entry should be checked?
The rated torque entry quoted above is 0.2 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the rated operational voltage data for 1692501?
It is listed in the specification table for Phoenix Contact 1692501 as <= 440 V AC. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1692501, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = 6 A for Phoenix Contact 1692501. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1692501?
Send the full catalog number 1692501, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1692501.
Q.How do I confirm compatibility of 1692501 before ordering?
Match the catalog number 1692501 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.