Phoenix Contact · Power Distributor
1692404 is a Phoenix Contact circuit breaker with Rated current Ie 12 A; Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics Supply voltage Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| Mechanical |
| Weight |
112.8 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1692404 (this page) |
Supply voltage Green LED |
<= 440 V AC |
| 1692433 |
Supply voltage Green LED |
<= 440 V AC |
| 1692459 |
Supply voltage Green LED |
<= 440 V AC |
| 1692501 |
Supply voltage Green LED |
<= 440 V AC |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1692404 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1692404
Phoenix Contact 1692404 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1692404; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Rated current Ie: 12 A — Match it to the existing panel and upstream protection.
- Rated torque: 0.4 Nm — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+60 °C — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1692404
Q.For 1692404, what does the specification table state about efficiency?
The specification table lists efficiency = up to 94 % for Phoenix Contact 1692404. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated torque for catalog number 1692404?
For 1692404, rated torque is given as 0.4 Nm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1692404, which operating temperature entry should be checked?
The operating temperature entry quoted above is -25...+60 °C. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1692404 before ordering?
Match the catalog number 1692404 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1692404 replace the unit currently installed in my panel?
Compare catalog number 1692404 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.