Phoenix Contact · Power Distributor
1680982 is a Phoenix Contact industrial component with Rated current Ie 12 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
107.4 kg/km |
| Mounting |
DIN rail / panel |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1680982 (this page) |
DIN rail / panel |
12 A |
| 1680966 |
DIN rail / panel |
12 A |
| 1662942 |
35 mm DIN rail (IEC 60715) |
12 A |
| 1662955 |
35 mm DIN rail (IEC 60715) |
12 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1680982 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1680982
Phoenix Contact 1680982 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1680982; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Match it to the existing panel and upstream protection.
- Efficiency: up to 94 % — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1680982
Q.Before ordering 1680982, which efficiency entry should be checked?
The efficiency entry quoted above is up to 94 %. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for 1680982?
It is listed in the specification table for Phoenix Contact 1680982 as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1680982, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 1680982. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 1680982?
Send the full catalog number 1680982, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1680982.
Q.How do I confirm compatibility of 1680982 before ordering?
Match the catalog number 1680982 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.