Phoenix Contact · Power Distributor
1662955 is a Phoenix Contact circuit breaker with Rated current Ie 12 A; Tripping characteristic 10 mm; Breaking capacity Icu/Ics Supply voltage per module Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Tripping characteristic10 mm
-
Breaking capacity Icu/IcsSupply voltage per module Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Breaking capacity Icu/Ics |
Supply voltage per module Green LED |
| Tripping characteristic |
10 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
2.5 Nm |
| Mechanical |
| Weight |
321.6 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 1 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1662955 (this page) |
10 mm |
Supply voltage per module Green LED |
| 1662942 |
10 mm |
Supply voltage per module Green LED |
| 1680966 |
— |
— |
| 1680982 |
— |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1662955 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1662955
Phoenix Contact 1662955 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1662955; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Efficiency: up to 94 % — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: 12 A — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1662955
Q.Which value is published under efficiency for catalog number 1662955?
For 1662955, efficiency is given as up to 94 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1662955, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 0.14 mm² ... 1 mm². Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the input voltage range data for 1662955?
It is listed in the specification table for Phoenix Contact 1662955 as 85...264 V AC / 110...300 V DC (IEC 61010). Confirm this figure against the unit currently in the panel.
Q.Can the 1662955 replace the unit currently installed in my panel?
Compare catalog number 1662955 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1662955?
Send the full catalog number 1662955, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1662955.