Phoenix Contact · Power Distributor
1680966 is a Phoenix Contact industrial component with Rated current Ie 12 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
96.6 kg/km |
| Mounting |
DIN rail / panel |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1680966 (this page) |
DIN rail / panel |
12 A |
| 1680982 |
DIN rail / panel |
12 A |
| 1662942 |
35 mm DIN rail (IEC 60715) |
12 A |
| 1662955 |
35 mm DIN rail (IEC 60715) |
12 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1680966 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1680966
Phoenix Contact 1680966 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1680966; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Terminal wire size: 19x 0.15 mm — Match it to the existing panel and upstream protection.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: 12 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1680966
Q.For 1680966, what does the specification table state about input voltage range?
The specification table lists input voltage range = 85...264 V AC / 110...300 V DC (IEC 61010) for Phoenix Contact 1680966. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated current Ie for catalog number 1680966?
For 1680966, rated current Ie is given as 12 A. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1680966, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1680966?
Send the full catalog number 1680966, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1680966.
Q.Can the 1680966 replace the unit currently installed in my panel?
Compare catalog number 1680966 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.