Phoenix Contact · Sensor Box
1680076 is a Phoenix Contact industrial component with Rated current Ie 12 A; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Rated torque |
0.2 Nm |
| Mechanical |
| Weight |
1.006 kg |
| Mounting |
DIN rail / panel |
| Terminal wire size |
0.34 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Sensor Box specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Sensor Box variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1680076 (this page) |
12 A |
DIN rail / panel |
| 1680089 |
12 A |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1680076 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1680076
Phoenix Contact 1680076 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1680076; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Enclosure rating: IP20 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.2 Nm — Match it to the existing panel and upstream protection.
- Terminal wire size: 0.34 mm² — Record it with the other nameplate data when sourcing a replacement.
- Weight: 1.006 kg — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1680076
Q.Which value is published under rated torque for catalog number 1680076?
For 1680076, rated torque is given as 0.2 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1680076, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated current Ie data for 1680076?
It is listed in the specification table for Phoenix Contact 1680076 as 12 A. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1680076 replace the unit currently installed in my panel?
Compare catalog number 1680076 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1680076 before ordering?
Match the catalog number 1680076 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.