Phoenix Contact · Connection Cable
1658435 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Rated operational voltage 72 V (DC); Breaking capacity Icu/Ics CAT5. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage72 V (DC)
-
Breaking capacity Icu/IcsCAT5
-
Enclosure ratingIP67 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
72 V (DC) |
| Breaking capacity Icu/Ics |
CAT5 |
| Frequency |
100 MHz |
| Rated speed |
100 Mbps |
| Mechanical |
| Weight |
10.143 g |
| Mounting |
For field assembly |
| Terminal wire size |
0.34 mm² ... 0.36 mm² (solid) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Breaking capacity Icu/Ics |
|
1658435 (this page) |
72 V (DC) |
CAT5 |
| 1656725 |
72 V (DC) |
CAT5 |
| 1607127 |
— |
— |
| 1619752 |
48 V AC |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1658435 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 72 V (DC) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides For field assembly support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1658435
Phoenix Contact 1658435 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1658435; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Weight: 10.143 g — Check this value against the nameplate of the installed unit before ordering.
- Frequency: 100 MHz — Match it to the existing panel and upstream protection.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1658435
Q.Where can I find the frequency data for 1658435?
It is listed in the specification table for Phoenix Contact 1658435 as 100 MHz. Compare it with the nameplate of the installed unit before ordering.
Q.For 1658435, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1658435. Confirm this figure against the unit currently in the panel.
Q.Which value is published under rated operational voltage for catalog number 1658435?
For 1658435, rated operational voltage is given as 72 V (DC). Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1658435?
Send the full catalog number 1658435, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1658435.
Q.Can the 1658435 replace the unit currently installed in my panel?
Compare catalog number 1658435 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.