Phoenix Contact · Connection Cable
1656725 is a Phoenix Contact circuit breaker with Rated current Ie up to 4 A; Rated operational voltage 72 V (DC); Breaking capacity Icu/Ics CAT5. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Rated operational voltage72 V (DC)
-
Breaking capacity Icu/IcsCAT5
-
Enclosure ratingIP67 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated operational voltage |
72 V (DC) |
| Breaking capacity Icu/Ics |
CAT5 |
| Frequency |
to 100 MHz |
| Rated speed |
1 Gbps |
| Mechanical |
| Weight |
10.4 g |
| Mounting |
For field assembly |
| Terminal wire size |
0.14 mm² ... 0.25 mm² (solid) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Breaking capacity Icu/Ics |
|
1656725 (this page) |
72 V (DC) |
CAT5 |
| 1658435 |
72 V (DC) |
CAT5 |
| 1607127 |
— |
— |
| 1619752 |
48 V AC |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1656725 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 72 V (DC) — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides For field assembly support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1656725
Phoenix Contact 1656725 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1656725; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Enclosure rating: IP67 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: For field assembly — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1656725
Q.Before ordering 1656725, which weight entry should be checked?
The weight entry quoted above is 10.4 g. Confirm this figure against the unit currently in the panel.
Q.Where can I find the breaking capacity Icu/Ics data for 1656725?
It is listed in the specification table for Phoenix Contact 1656725 as CAT5. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1656725, what does the specification table state about mounting?
The specification table lists mounting = For field assembly for Phoenix Contact 1656725. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1656725 replace the unit currently installed in my panel?
Compare catalog number 1656725 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1656725 before ordering?
Match the catalog number 1656725 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.