Phoenix Contact · Connector
1652949 is a Phoenix Contact circuit breaker with Rated current Ie 1 A; Rated operational voltage <= 440 V AC; Breaking capacity Icu/Ics CAT6. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie1 A
-
Rated operational voltage<= 440 V AC
-
Breaking capacity Icu/IcsCAT6
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
1 A |
| Rated operational voltage |
<= 440 V AC |
| Breaking capacity Icu/Ics |
CAT6 |
| Mechanical |
| Weight |
21.8 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+60 °C |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connector variants |
| Catalog number |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1652949 (this page) |
CAT6 |
<= 440 V AC |
| 1402398 |
CAT5 (IEC 11801:2002) |
<= 440 V AC |
| 1404549 |
CAT6A |
72 V (DC) |
| 1407504 |
CAT5 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1652949 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — <= 440 V AC — and switches or conditions the load within the 1 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1652949
Phoenix Contact 1652949 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1652949; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated operational voltage: <= 440 V AC — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP20 (IEC 60529) — Match it to the existing panel and upstream protection.
- Rated current Ie: 1 A — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -25...+60 °C — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1652949
Q.Before ordering 1652949, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 1652949?
It is listed in the specification table for Phoenix Contact 1652949 as 21.8 g. Confirm this figure against the unit currently in the panel.
Q.For 1652949, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+60 °C for Phoenix Contact 1652949. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 1652949?
Send the full catalog number 1652949, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1652949.
Q.How do I confirm compatibility of 1652949 before ordering?
Match the catalog number 1652949 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.