Phoenix Contact 1646010 Connection Cable

SKU: 1646010
Regular price $1,163.63
In stock (66 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Connection Cable

1646010 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 4 A
  • Enclosure ratingIP67 (IEC 60529)
  • Operating temperature-25...+80 °C (IEC 60068-2-1)
  • CertificationsCE, UL, cULus

Specifications

Electrical
Rated current Ie up to 4 A
Rated torque 15 Nm (Union nut)
Mechanical
Dimensions (H x W x D) 46 mm
Weight 136.42 g
Terminal wire size 1
Enclosure rating IP67 (IEC 60529)
Environment and compliance
Operating temperature -25...+80 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Connection Cable variants
Catalog number Rated operational voltage Rated current Ie
1646010 (this page) — up to 4 A
1607127 — up to 4 A
1619752 48 V AC up to 4 A
1621517 630 V AC (Overvoltage category III/3) up to 4 A

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1646010 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1646010

Phoenix Contact 1646010 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1646010; always cross-check the catalog number and hardware revision on the nameplate before placing an order.

  • Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
  • Rated torque: 15 Nm (Union nut) — Check this value against the nameplate of the installed unit before ordering.
  • Terminal wire size: 1 — Match it to the existing panel and upstream protection.
  • Dimensions (H x W x D): 46 mm — Record it with the other nameplate data when sourcing a replacement.

Cross-check the ratings above with the installed device before confirming the order.

Common questions about 1646010

Q.Before ordering 1646010, which rated current Ie entry should be checked?

The rated current Ie entry quoted above is up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.

Q.Where can I find the rated torque data for 1646010?

It is listed in the specification table for Phoenix Contact 1646010 as 15 Nm (Union nut). Compare it with the nameplate of the installed unit before ordering.

Q.For 1646010, what does the specification table state about certifications?

The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1646010. Confirm this figure against the unit currently in the panel.

Q.What should I include in an enquiry for 1646010?

Send the full catalog number 1646010, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1646010.

Q.Can the 1646010 replace the unit currently installed in my panel?

Compare catalog number 1646010 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!