Phoenix Contact · EV Charging Controller
1622459 is a Phoenix Contact power supply with Output voltage 30 V; Output current 0.5 A (Total current for all outputs; internally supplied); Input voltage range 12 V. It is used in DIN-rail control cabinets, sensor and relay supplies, backplane bus power where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Output voltage30 V
-
Output current0.5 A (Total current for all outputs; internally supplied)
-
Input voltage range12 V
-
Supply voltage24 V DC (IEC 61131-2)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Input voltage range |
12 V |
| Output voltage |
30 V |
| Output current |
0.5 A (Total current for all outputs; internally supplied) |
| Power consumption |
< 0.5 W (No-load) |
| Frequency |
50 Hz ... 60 Hz |
| Rated speed |
9.6 kbps ... 19.2 kbps (adjustable) |
| I/O and communication |
| Bus interface |
RS-485 |
| Mechanical |
| Weight |
410 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 4 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 95 % |
Values follow the Phoenix Contact EV Charging Controller specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Where it sits in the control system
The 1622459 is the device-level element in a Phoenix Contact power supply installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in DIN-rail control cabinets, sensor and relay supplies, backplane bus power, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1622459
Phoenix Contact 1622459 — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number 1622459; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Input voltage range: 12 V — Confirm the revision of the installed unit before a like-for-like replacement.
- Humidity: 30 % ... 95 % — Use it as the reference when cross-checking a current-production equivalent.
- Output voltage: 30 V — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0.2 mm² ... 4 mm² — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1622459
Q.Which value is published under power consumption for catalog number 1622459?
For 1622459, power consumption is given as < 0.5 W (No-load). Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 1622459, which output voltage entry should be checked?
The output voltage entry quoted above is 30 V. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the output current data for 1622459?
It is listed in the specification table for Phoenix Contact 1622459 as 0.5 A (Total current for all outputs; internally supplied). Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1622459 replace the unit currently installed in my panel?
Compare catalog number 1622459 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1622459?
Send the full catalog number 1622459, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1622459.