Phoenix Contact · Connection Cable
1607127 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Weight |
444.8 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated operational voltage |
Mounting |
Rated current Ie |
|
1607127 (this page) |
— |
DIN rail / panel |
up to 4 A |
| 1619752 |
48 V AC |
— |
up to 4 A |
| 1621517 |
630 V AC (Overvoltage category III/3) |
— |
up to 4 A |
| 1621559 |
630 V AC (Overvoltage category III/3) |
Front mounting/square flange (4x Ø 3.2 mm) |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Selection notes for Phoenix Contact 1607127
Phoenix Contact 1607127 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1607127; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Rated current Ie: up to 4 A — Record it with the other nameplate data when sourcing a replacement.
- Weight: 444.8 g — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1607127
Q.Before ordering 1607127, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the weight data for 1607127?
It is listed in the specification table for Phoenix Contact 1607127 as 444.8 g. Compare it with the nameplate of the installed unit before ordering.
Q.For 1607127, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 1607127. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1607127 before ordering?
Match the catalog number 1607127 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1607127?
Send the full catalog number 1607127, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1607127.