Phoenix Contact · Power Distributor
1516797 is a Phoenix Contact circuit breaker with Rated current Ie 10 A; Tripping characteristic 7 mm; Breaking capacity Icu/Ics Supply voltage per module Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Tripping characteristic7 mm
-
Breaking capacity Icu/IcsSupply voltage per module Green LED
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Breaking capacity Icu/Ics |
Supply voltage per module Green LED |
| Tripping characteristic |
7 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.35 Nm |
| Mechanical |
| Weight |
256.6 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1516797 (this page) |
Supply voltage per module Green LED |
| 1516726 |
Supply voltage per module Green LED |
| 1516056 |
Supply voltage Green LED |
| 1516111 |
Supply voltage Green LED |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1516797 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1516797
Phoenix Contact 1516797 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1516797; record the nameplate data of the unit being replaced before selecting an equivalent.
- Tripping characteristic: 7 mm — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+70 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.35 Nm — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1516797
Q.Where can I find the enclosure rating data for 1516797?
It is listed in the specification table for Phoenix Contact 1516797 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.For 1516797, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = Supply voltage per module Green LED for Phoenix Contact 1516797. Confirm this figure against the unit currently in the panel.
Q.Which value is published under terminal wire size for catalog number 1516797?
For 1516797, terminal wire size is given as 0.14 mm² ... 1.5 mm². Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1516797 before ordering?
Match the catalog number 1516797 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 1516797?
Send the full catalog number 1516797, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1516797.