Phoenix Contact · Power Distributor
1516111 is a Phoenix Contact circuit breaker with Rated current Ie 6 A; Breaking capacity Icu/Ics Supply voltage Green LED; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie6 A
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
6 A |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.2 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
864.1 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
42x 0.10 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1516111 (this page) |
Supply voltage Green LED |
| 1516056 |
Supply voltage Green LED |
| 1516726 |
Supply voltage per module Green LED |
| 1516797 |
Supply voltage per module Green LED |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1516111 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 6 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1516111
Phoenix Contact 1516111 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1516111; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Breaking capacity Icu/Ics: Supply voltage Green LED — Verify it in the project documentation before confirming the order.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Check this value against the nameplate of the installed unit before ordering.
- Rated torque: 0.2 Nm — Match it to the existing panel and upstream protection.
- Efficiency: up to 94 % — Record it with the other nameplate data when sourcing a replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1516111
Q.For 1516111, what does the specification table state about flame detection?
The specification table lists flame detection = DIN EN 50265 for Phoenix Contact 1516111. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under weight for catalog number 1516111?
For 1516111, weight is given as 864.1 g. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1516111, which rated torque entry should be checked?
The rated torque entry quoted above is 0.2 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1516111 replace the unit currently installed in my panel?
Compare catalog number 1516111 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1516111?
Send the full catalog number 1516111, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1516111.