Phoenix Contact 1516797 Power Distributor

SKU: 1516797
Regular price $421.72
In stock (76 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Power Distributor

1516797 is a Phoenix Contact circuit breaker with Rated current Ie 10 A; Tripping characteristic 7 mm; Breaking capacity Icu/Ics Supply voltage per module Green LED. It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ie10 A
  • Tripping characteristic7 mm
  • Breaking capacity Icu/IcsSupply voltage per module Green LED
  • Enclosure ratingIP20 (IEC 60529)

Specifications

Electrical
Rated current Ie 10 A
Breaking capacity Icu/Ics Supply voltage per module Green LED
Tripping characteristic 7 mm
Input voltage range 85...264 V AC / 110...300 V DC (IEC 61010)
Efficiency up to 94 %
Rated torque 0.35 Nm
Mechanical
Weight 256.6 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.14 mm² ... 1.5 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature -25...+70 °C (IEC 60068-2-1)
Certifications CE, UL, cULus

Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Power Distributor variants
Catalog number Breaking capacity Icu/Ics
1516797 (this page) Supply voltage per module Green LED
1516726 Supply voltage per module Green LED
1516056 Supply voltage Green LED
1516111 Supply voltage Green LED

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1516797 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1516797

Phoenix Contact 1516797 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1516797; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Tripping characteristic: 7 mm — Verify it in the project documentation before confirming the order.
  • Operating temperature: -25...+70 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
  • Rated torque: 0.35 Nm — Match it to the existing panel and upstream protection.
  • Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.

Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.

Common questions about 1516797

Q.Where can I find the enclosure rating data for 1516797?

It is listed in the specification table for Phoenix Contact 1516797 as IP20 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.

Q.For 1516797, what does the specification table state about breaking capacity Icu/Ics?

The specification table lists breaking capacity Icu/Ics = Supply voltage per module Green LED for Phoenix Contact 1516797. Confirm this figure against the unit currently in the panel.

Q.Which value is published under terminal wire size for catalog number 1516797?

For 1516797, terminal wire size is given as 0.14 mm² ... 1.5 mm². Use the value as the reference when sourcing a current-production equivalent.

Q.How do I confirm compatibility of 1516797 before ordering?

Match the catalog number 1516797 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.What should I include in an enquiry for 1516797?

Send the full catalog number 1516797, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1516797.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!