Phoenix Contact · Power Distributor
1516056 is a Phoenix Contact circuit breaker with Rated current Ie 6 A; Breaking capacity Icu/Ics Supply voltage Green LED; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie6 A
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
6 A |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.2 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
92 kg/km |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1516056 (this page) |
Supply voltage Green LED |
| 1516111 |
Supply voltage Green LED |
| 1516726 |
Supply voltage per module Green LED |
| 1516797 |
Supply voltage per module Green LED |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1516056 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 6 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1516056
Phoenix Contact 1516056 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1516056; record the nameplate data of the unit being replaced before selecting an equivalent.
- Mounting: 35 mm DIN rail (IEC 60715) — Check this value against the nameplate of the installed unit before ordering.
- Efficiency: up to 94 % — Match it to the existing panel and upstream protection.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Record it with the other nameplate data when sourcing a replacement.
- Rated current Ie: 6 A — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1516056
Q.Where can I find the rated current Ie data for 1516056?
It is listed in the specification table for Phoenix Contact 1516056 as 6 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1516056, what does the specification table state about breaking capacity Icu/Ics?
The specification table lists breaking capacity Icu/Ics = Supply voltage Green LED for Phoenix Contact 1516056. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 1516056?
For 1516056, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Can the 1516056 replace the unit currently installed in my panel?
Compare catalog number 1516056 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1516056 before ordering?
Match the catalog number 1516056 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.